Wireless Security System

Additional Details

We provide a range of Wireless Security System that is appreciated by the clients for ultra-sophisticated sensor design and innovative user-friendly features. These are successfully meeting the requirements of various commercial and residential establishments such as residential places, small showrooms, hospitals, temples and corporate houses. Some of the technical specifications of our range of Black Cat Cub model are as follows:
 

• ¨      12-zone (8 wireless and 4 wired), 8 wireless zone can expand up to 24 sensors.

  ¨      Support to CONTACT ID protocol.

  ¨      Access Codes, 1 installer code, 1 master code. 8 common user codes and duress code.

  ¨      Dial 5 telephone numbers (mobile and Land Line number). Alarm telephone is priority.

  ¨      Compatible with DTMF and pulse dialing.

  ¨      Phone line be cut or short-circuit will send an alarm. (Indicator or siren for optional)

  ¨      Remote Arm/Disarm, monitor, and on-site alarm Setup.

  ¨      Automatically learning code between Wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones and 8 remote controllers)

  ¨      Wired zone responds speed (5ms-1000ms) and support (Normal Open, Normal Close and end of line resistance) at freedom.

  ¨      Zone attribute can be program for Fire alarm, Medical alarm, and Emergency alarm at freedom. Each zone can be programmed with different remote controllers.

  ¨      Two timers can be set to Arm/Disarm independently.

  ¨      Voice pre-recorded.

  ¨      Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.

  ¨      Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will send alarm.

  ¨      Work with wired/wireless Siren and linkage device.

  ¨      Lastest 20 pieces alarm can be recorded and can't be deleted. Last Arm Disarm time can be remembered.

  ¨      Main unit and slave detector make communication times in 24 hour to check if there is communication malfunction. If there  is a malfunction, the main console will alert corresponding zone within 26 hours.

  ¨      Slave detector sends report to main unit once it is turn on. Main unit will indicate.

  ¨      BothAC220V and 12V1.2AH storage battery power supply, and change automatically.

  ¨      Telephone lightning proof.