Vacuum Pressure Impregnation Machine

Additional Details

We are among the eminent names in the industry for manufacturing and supplying Vacuum Pressure Impregnation Machine. The offered machine is effective in impregnating deep voids of winding for increasing the working ability of wind turbines, generators, transformers, capacitors and coils. This machine is robust in terms of construction as well.

Features:

• Robust construction
• Effective impregnation
• User-friendly

Other details:

Electrical current that rows through a coil always causes a vibration of the entire winding called transformer humming or microphonic effect and generates heat which reduces the life of the windings.

Voids in the windings also accelerates the degradation of insulation material and causes the transformer to fail prematurely.

VPI Plant produces a better insulation for better environmental protection and moisture resistance. The removal of air voids from the windings assures longer electrical life.

These plants are specially used to force an Impregnate / Varnish into the deep voids of winding for better penetration and reduce the air gaps.

These plant are used for insulation treatment of following electrical Product:

• H.V motors and generators
• Wind turbines
• Dry type transformers
• Insulation material of cable
• Power capacitor

Categorization: 

• VPI plant for motor windings
• VPI plant for transformers

Technical Specification: 

Impregnation tank:

• Operating pressure: 0 – 10 kg/sq cm2
• Chamber Size range: Dia 500 mm to 3000 mm
• Type of clamping
• Manual clamping
• Bayonet clamping
• Accessories mounting
• Safety valve
• Pressure relief valve
• Vacuum breaker
• Sight and light arrangement

Storage tank: 

• Storage tank specially designed to store varnish, oils or liquids as per customer need or varnish manufacturer specified.
• Heating system to maintain temperature ranging from 25 C to 80 C
• Cooling system for to maintain temperature of 0 c to 25 C
• 100 mm rock wool insulation used to avoid heat transfer.

Stirrer: 

• A stirrer with 3 nos Airfoil shaped blades is provided in order to reduce temperature gradient of varnish between side walls and a center of tank
• Stirrer speed – 70 rpm
• Bearing housing and stool provided in order to reduce friction, noise and for ease operation.

Pressure system:

• For pressure either the line can be taken from existing compressor unit or will be provided us as per customer requirement
• Moisture separator
• Safety devices
• Pressure regulator.

Control Panel: 

• Control panel will be provided as per customer requirement
• Manually operated
• PLC based.