Additional Details
Introduction:
ACON-08 (Fiber Optic to RS232/RS485 Converter) converter converts .Asynchronous serial to Fiber Optics.
Specifications:
Communication:
Transmission ne: Dual Multimode Optical Cable
Interfaces: Asynchronous Rs232 //rs422/rs485 (2 Wire/4 Wire) Auto Control
Serial Side Connectors: Db-9 Female For Rs232
pbt For Rs485 And Rs422
Optical Side Connector: St-female
Speed In Bps: 4800 To 115200
Optic Wavelength: 820 Nm
Fiber Range: 2.5 Miles
Optical Fiber Sizes: 50/125um,62.5/125um,100/140um & 200 Micro MeteR
Indications:
When Unit ACON-08 is powered on LED glows continuously.
Mechanical:
Input Side Connector : Dual Multimode optical cable
Output Side Connector : DB 9 pin –Female
Power Connector : ‘L’ type 3 pin PBT Connector
Enclosure : Din Rail Mounting.
Dimensions : 45[W] X 110[D] X 75[L]mm.
Electrical:
Power Supply : 90-230VAC, +10%, 50 Hz.
Power Consumption : 1.2 Watt
Optical Isolation : 1.5 KV.
Operating Conditions:
Temperature : 0-55 0 C.
Relative Humidity : 5- 95 %- non condensing.
Dip Setting:
Remove the plate at the bottom of the converter.
Do the necessary settings as per the requirement.
Note:
Connect the Mains to proper points i.e. For 230VAC supply, connections should be made between points 0 and 230.
 converter converts .Asynchronous serial to Fiber Optics.
Specifications:
Communication:
Transmission ne: Dual Multimode Optical Cable
Interfaces: Asynchronous Rs232){kind=link}