We offer Parker O-Lok Fitting that effectively rejects outflow in hydraulic systems and permit higher operating pressures (630 bar up to 12mm / 1/2" O.D.) We offer the range in Parker O-Lok fittings in steel, stainless steel and brass. These find application in a variety of tube dimensions and wall thicknesses. These are perfect for use with metric and inch tubing. A single Parker O-Lok fitting body can house several different tube diameters just by changing the sleeve or braze-on spud.
Design and Construction z
Parker O-Lok fittings can be assembled either by orbital flanging of the tube using the Parker Parflange process or by brazing a spud on the tube end.
Flanging
Preparing the tube end using the Parker Parflange process provides the user with the means of easily achieving a leak-free connection. It is ideal for in-house or on site applications.
Brazing
An alternative solution is to assemble Parker O-lok Fittings using a brazing spud on the tube end. Brazing can be useful for field assembly or when small quantities of tubes are being prepared.
EITHER CASE
In both cases the tube end plus sleeve or spud acts as a reinforced point to provide higher vibration and impulse resistance. Parker O-Lok fittings consist of Fitting body, Sleeve, O-ring and Nut.
The Parker O-Lok Body
There are over 30 different body shapes to choose from when specifying Parker O-Lok fittings for your application. The body face has a machined groove which contains an O-Ring.
Parker O-Lok shape fittings are manufactured from forgings for greater strength and longer service life.
The Parker O-ring
A 90 degree Durometer Shore Nitrile O-ring is held captive in the groove of the fitting body. Note that Nitrile O-ring can be replaced by other O-ring materials.
Captive Groove Design
The O-ring groove incorporates an overhang to retain the O-ring in position, helping to eliminate O-ring loss or disturbance during tube assembly. This feature is now standardized under SAE J1453 as an alternative groove design.
The Parker O-Lok Sleeve
Mechanical sleeve
During the 90 degree flanging operation, the tube is pressed against the inner surface of the Parflange Sleeve, providing high rigidity when assembles to the fitting. Each Parflange sleeve is manufactured to strict tolerances and marker Parflanhe ensuring you of the highest quality assembly.
Brazed sleeve
Parker also manufactures spuds that can be brazed onto the tube. Reducing spuds allow Downsizing a large tube end to a smaller one.
The Parker O-Lok Nut
Parker O-Lok fitting nuts are cold formed (smaller sizes) or hot forged (larger sizes), depending on size.
Parker O-Lok Finish
Parker P-Lok steel fittings are yellow zinc plated (thickness 8 to 14um). This plating gives a high corrosion resistance (350 hours salt spray test to red rust*).
*Test in accordance with ASTM B117 or NFX 4.1.002.
Soft-Seal Capability
The design of the Parker O-Lok fittings used with the Parflange flanging system gives only one leak path which is sealed by a standard 90º Shore a Nitrile O-ring.
Reusability/Remake
Parker O-Lok fittings can be assembled and disassembled many times. It is recommended that the O-ring is replaced to ensure a perfect assembly.
We, ARVI HITECH since the year 2004 have been a name to reckon with in the Fluid Power Industry of the country. We are the dealer and distributors of Parker in India. We are the dealer and distributors of Parker in India. Subsequently we have also acquired the distributorship of Autorotor, Legris Connectic in India.
More details:View company website
Its Free
Verify Now
