Infant Care Incubators

Additional Details

nfant care incubators made available by us are designed to meet requirements of of newborns, Low-Birth-weight ones, suffering from recurrent apneic conditions. These offered products are provided with isolated sensing micro computerized high/low/delay alarms that make these ideal for continuous monitoring.

Working:

Continuous monitoring of respiration rate of the baby

Audio-visual alarm of apnea, i.e. if breathing stops

Settable high and low respiration alarms

Mains and battery operation facility

Breath Alarms:

High: 60 to 120 breaths per minute

Low: 0 to 60 breaths per minute

Delay: 5, 10, 15, 20, 25, 30 seconds

Mechanical Specifications:

Stainless Steel removable sub assemblies like baby tray and blower system for ease of disinfection/fumigation

Main Cabinet Fabricated in Mild Steel painted with Epoxy Paint

Acrylic canopy with front admittance and 4 port holes. excellent access and sealing through gloves on port holes

Range: 0 to 120 breaths per minute

Accuracy: +/-2 breaths above 30 breaths per minute

Fresh air ventilation through filter

Humidity indication by hygrometer

Inlet for oxygen, I.V. Fluids

Respiratory tubing and ancillary probes or electrodes

I.V. stand facility

Single spacious storage cabinet

Alarms (with audio mute facility):

 Skin +1°C audio visual alarm

Skin -1 C audio visual alarm

Air >39°C audio visual alarm

Power failure audio visual alarm

Safety Cut off:

When skin temperature exceeds 38°C

When air temperature exceeds 39°C

Power source: 230+/-10% Volts AC 50 Hz

Power consumption: 600 Watts

Heater capacity: 500 Watts

Temperature controller: Air proportionate controller

Control range: Canopy temperature to 39°C.

Technical Specifications

Temperature controller: servo proportionate controller

Skin mode control: body temperature to 38°C

Air mode control: canopy temperature to 39°C

Resolution: 0.1°C

Accuracy: +/- 0.2°C.