Additional Details
The minimum value holding function provides the easy detection of hole diameter.- An analog bar indicator is integrated to enhance the intuition in reading.- GO/±NG judgment is performed by setting the upper and lower tolerances.- Up to four rods (250mm or 500mm) can be used. Technical DataAccuracy: Wide Range: 0.003mm / .00012”Narrow Range: 0.002mm / .00008” Resolution: .00005" / 0.001mmDisplay: LCDBattery: SR44 (1 pc.) (938882)Battery life: Approx. 9 months for normal useDust/Water protection level: Conforming to IP53FunctionsOrigin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only),Data output, GO/±NG tolerance judgmentAlarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error
