Cast Iron Electrode Carver - 9755

Additional Details

PROCEDURE
Clean welding zone. Select lowest amperage possible. Use short arc and guide elecrode steeply since it gives spray transfer, helpful for sealing pores in Cast iron. After each bead peen deposit.

Technical Specifications

FEATURES
CARVER 9755 if for the repair and joining of heavy sections of cast iron. Weld deposits are non-macinable. Designed specifically for on-the-job repairs of cast iron, which eliminates the necessity of dismantling equipment. While preheating is recommended, the electrode may be used without pre-heating or post-heating in many instances.


TECHNICAL DATA
Alloy Type :     Fe, Ni Alloy
Tensile Strength :     580 N/mm2
Machinability :     Non-Machinable

RECOMMENDED CURRENT RANGE
SIZE (mm)     3.15     4.00     5.00
AMPS     60-110     100-140     140-170
 

Applications

APPLICATIONS
Welding or surfacing of Cast Iron. Joining of cast iron to steel. Economical electrode particularly for massive parts and large castings. E.g. repair of foundry defects, damanged or cracked castings. Can be used on rusty, corroded and oil soaked parts. Good bonding properties on difficult to weld cast iron. For obtaining better machinability, deposit final pass with CARVER 9700 Or 9750.