Bench Model Metal Hardness Tester

Additional Details

The mechanism is housed in a cast iron body to protect it from dust. The elevating screw is provided with protective bellow sleeves. Major loads of 60,100 and 150 KGF are constructed so that theses can be stacked only in proper progression. On one end of the load lever, the weight is applied gradually by means of a hydraulic dash pot. The force is transmitted by the load lever to the plunger and thereby to the test piece. The accuracy of the machine is guaranteed as per B.S. 891 : part I 2-1964.Models:-TRMAG: Manual weight selection with automatic zero adjustment of dial gauge.TRBM: Manual weight selection with automatic zero setting dial gauge, and facility of Brinell testing.TRBM-A1: Provided with automatic weight selection and automatic zero setting dial gauge, having 187.5 kgf weight for Brinell test.TRBM-A2: With to additional weights of 187.5 KGF and 250 KGF for Brinell tests. A small pin having dia. 2mm can be tested as plunger is guided in a set of six bearings.TRM-SF: Similar to TRBM-A2 in construction, but with manual weight selection. Useful for carrying Rockwell and Rockwell superficial Tests.