Air Washer ( Evaporative Cooling Unit )

Additional Details

Our Product Capacity range: - 2000 - 75000 CFM.Single and double skin construction.High grade galvanized steel frames are used for the construction of these units, with a minimum thickness range of 1.6 millimeters.The dual-skin air washer is made of extruded aluminum hollow profile with 25/43 mm double skin panels with CFC and HFC for PUF and a density of 40Kg / cum.Centrifugal fans used by DIDW are Advanced / Curved back or Aerofoil AMCA Certified in general from NICOTRA or KRUGER done. All fans are statically and dynamically balanced.Common base frame for motor and fan.Multiple slope S.S-304, Aluminum or G.I. Drain ensures adequate drainage of condensate.Induction motor with TEFC Squirrel cage for cycle 50/60, 415 10% volts with AC power supply in 3 phases or 1 phase.Engine: SIEMENS / ABB / KIRLOSKAR or any other motor of western origin.Microvee filter with primary filters are offered with these products.We manufacture cellulose / spray type humidification systems (single / double bench).Evaporative cooling plates are: HUTEK (THAILAND) or Munters (USA) and can also be supplied according to a customer's specification.Spray humidification systems are manufactured from G.I / M.S. Brass nozzle / nozzle / PVC.A perforated sheet is also provided in spray type humidification systems to ensure proper distribution of the air in the humidification chamber.We use 4-ply PVC / G.I eliminators to ensure that no water is carried to the ventilator section and duct system.RAL colored air washers are available.