This model is a cyclic timer incorporated into the water level controller which is suitable for wells with limited water source. In some places, Borewells will pump water for a few minutes ranging from 3 minutes to 30 minutes, after which it will stop pumping due to lowering of the water table in the bore. The water table will resume after a certain time which goes again from one hour to 10 hours. In such cases, the pump must be used with ON time and the required OFF time.
The system Automatically controls the pumping of Borwell water with a limited yield to the air tank or the underground tank.
The system also provides dry run protection at the Borewell pump. (Ie when water is not pumped into the tank for any reason).
The system can be programmed to set the ON time at which the pump is to be operated and the OFF time of the pump.
The system has separate three-digit and seven-segment LED displays to indicate the set time and elapsed time.
There are only four diaphragm pushbuttons for complete programming.
The system has an integrated memory for storing the operating status and the programmed ON and OFF time.
The system memory also memorizes the running time in progress and stops the operation and in the event of a power failure, it is continuous from the elapsed time.
System memory is non-volatile, i. E. It retains all stored information even in the event of a power failure.
The system provides low voltage and high voltage protection and has over voltage voltage / current protection for the Pumpset.
The system comes with industrial grade electronic components, a reliable power supply and a power contactor in a molded plastic panel mounting box.
The system is adaptable for all types of starters of single-phase and three-phase motors.
This system is suitable for residences, commercial complexes, residential apartments and industries.
The system has a three-position power control toggle switch with "Auto", "Off" and "Manual" modes.
In "Manual" mode, the Pumpset can be controlled directly and the level controller is completely stopped and bypassed.
The system comes with an unconditional one year warranty.
Located at Bengaluru, Karnataka, India, we, “MV Instruments,” are the major manufacturers and suppliers of a wide variety of Water Level Controllers/Indicators.
More details:View company website