Yahska Polymers Pvt Ltd

Other Details

Our company also formulates Acrylic Copolymer Emulsion YP-ACR, which is a cement based 'acrylic copolymer emulsion' for coatings, screed and mortar. These are used to enhance water proofing and mechanical properties like tensile, flexural, adhesion, compressive and impact strength.

Benefits:

YP – ACR coating mixed with cement gives excellent water proofing properties to the substrate

Excellent resistance to UV rays

Provides excellent adhesion to concrete asbestos, steel, substrate, etc

Excellent breathing properties

Used for coating applications, which come in continuous contact with water

Helps in reducing corrosion of the reinforcement

Helps in minimizing fungal and micro organism attack

Environment friendly, resistant to weathering effect, non-flammable and non-toxic

Directions for Use:

Surface Preparation:

The substrate must be cleaned and free from dust, paint, grease, plaster, oil, scale, corrosion deposits, and other deleterious substances.

Priming:

After this, damp the surface with least amount of water. Scrub with YP ACR into the substrate. Then apply mortar topping while the primer is still tacky.

Typical Mix designs to modify mortars:

OPC 50 kg + Zone 2 Sand 150 kg + YP ACR 8-10 liters

Then, water is added to give the needed consistency. It is always recommended to conduct trials to optimize the mix designs.

Process for repairs:

All surfaces including edges should be primed , using YP ACR

Temporary shuttering should be used

Water content of the mortar should be kept least

Use clean &dry sand.

Where the use of wet sand is unavoidable, the quality of water to be added must be reduced Mortars should be cured using YP ACR to prevent rapid drying out

Mortar should not be re tempered after initial set.

Product Application

Suitable for water proofing coatings of toilet, roof, terrace, water tank, basement, swimming pool, etc

Used for repairing of concrete and masonry works, for protection of concrete against salt attacks, corrosion, etc

Used as an additive in cement paints to improve their water proofing properties and increases durability.