Welcome to Pepagora.com, Join FreeSign In
Submerged Arc Welding Wires
Welding Flux SAW
Its Free
pick-up is obtained. When manganese content in wire is less than 1.5%, also a manganese pick-up. Grain size: 10 to 60 mesh. Basicity:1.0 (BIIW). It has excellent welding technology properties.
Item Code : PWL-8101
Characteristics:
PWL-8101 is an agglomerated calcium-silicate type flux Metallurgical behavior: High silicon pick-up is obtained. When manganese content in wire is less than 1.5%, also a manganese pick-up. Grain size: 10 to 60 mesh. Basicity:1.0 (BIIW). It has excellent welding technology properties. Regularly shaped welds are deposited without reduction of area or interface notches. Slag detachability is good. A short slag is produced, thus allowing circumferential welding on small-diameter workpieces without the risk of uncontrolled slag. The production of large pipes (especially spiral pipe welding) is a typical application for this flux. Relatively high manganese pick-up is obtained, thus allowing the flux bi be used with wires with a low Mn content. As the bulk density is low, so is the consumption rate. Damp flux should be redried at 300-350°C for 2 hours.
