M G Industries

Other Details

We offer Hi- Rib Roofing And Wall Cladding Systems.

Following are the Base Material Options:

    Galvalume: Galvalume high tensile cold rolled steel as per AS 1397, coating class AZ 150 (min. 150 gms/m2 Zinc – aluminum alloy coating mass, total of both sides), 550 MPa/300 MPa yield strength. The alloy coating comprises of 55% Aluminum, 43.5 % Zinc &1.5 % Silicon. Available in bare finish & color coated finish, with sheet thickness between 0.47mm to 0.60 mm

    Galvanized Steel: Galvanized cold rolled Steel as per IS:277 & IS:513(min. 175gms/m2 zinc coating mass total of both sides, 240 MPa yield strength. Available in bare finish and color Coated finish

    Aluminum: Aluminum Alloy AA 3105

Paint Finish:

Galvalume : Super polyester XRW silicon modified polyester or fluoro polymer 20 microns top coat over primer (finished side) neutral back coat of 5 micron over primer (back side)

Galvanized Steel: Polyester top coat of 20 microns, over primer of 5 microns (Finished side.) with back coat (back side)

Features:

    Sonex Hi-Rib Roofing system is a combination of both, high strength and corrosion resistance with the least maintenance cost

    Easy and faster to install, thereby cutting down on project time

    Light weight there by putting lesser load on structure

    Weather proofOffers wide range of design choices

    Aesthetically good looking

    Fire resistant.

    Eco friendly

    Better scrap valve

Product Application

    Factory sheds

    Railway stations

    Ware houses

    Metro Stations

    Aircraft hangers

    Power Plants

    Work Shops

    Petrol Pump Canopies

    Super Markets

    Pre Fabricated structures

    Other miscellaneous structures

Technical Specifications

    Permanently color coated, profiled sheet with Hi-Rib depth of 30 mm at minimum 200 mm pitch distance over purines and fixed with self drilling galvanized fasteners

    Sonex Hi-Rib sheet comes with profiled with of 1070 mm and cover width of 1000mm

    Profiled sheet shall be roll formed out of desired material (viz galvanized steel, galvalume or aluminum) of desired thickness and paint finish. ( Please refer technical data for choices)

    The sheet shall be fixed over the purling with hexagonal head self drilling fasteners including neoprene/ EPDM washers on each crust of sheet. The fasteners are fixed mechanically using electric tools through crests and troughs