Lakshmi & Co

Other Details

Note: Vibro form Table cement tile is having two layers, first Color Mix layer and Second one Base mix.

1. Prepare color mix by pan mixer with Color Pigments, Cement, Sand & Granite Chips as per ratio.

2. Prepare Base Mix by Concrete Mixer / Pan mixer with Cement, Sand and Granite Chips.

3. Pour measured color mix into the rubber mould and place it on the first Vibro form Table Machine, by the Special type of vibration the mould automatically moves to the end of the machine.

4. Fill the mould with base mix and pass through the second Vibro form Table machine.

5. Collect rubber moulds from the end of second Vibro form Table machine with a plain sheet for normal.

drying for 6 to 12 hours ( time will vary as per climate conditions)

6. Strip out the tiles from the moulds after drying.

Technical Specifications