Fine Marketing

Other Details

Notch Broaching machine suitable for ferrous & non-ferrous material for sample preparation of ‘V’ & ‘U’ notches for Impact Testing Machine.

Notch Broaching Machine can cut correct ‘U‘ & ‘V‘ notches in Charpy or Izod specimen by means of a multi-toothed broach.

Manual Notch Cutting Machine:

Robustly constructed machine cuts the notches by means of a specially designed multi-toothed broach, which is drawn across the specimen by self -push of rotating hand wheel. A simple hand-vice for holding the specimen is built on to the machine. The tooling includes the adjustors & end stops necessary to ensure notch-depth & position are correctly set.

The approx.weight is around 35 kg.

The machine dimension (approx.) 210mm X 210mm X 1050mm.

Motorised Notch Cutting Machine:

The machine is a free standing unit built sturdily. The broach is mounted in a carrier, which is drawn by a twin lead screw mechanism through the full stroke with the help of 0.5 HP motor. V/U notch Broaching Machine fixture to clamp the specimen. The tooling includes the vice for holding the 10mm X 10mm specimen. The tooling/ fixtures include the adjustors & the end stop necessary to ensure the notch depth & position accurately as per the Standards.

The approx. weight is around 100 kg.

The machine dimension (approx.) 385mm X 385mm X 1050mm.

The machine will broach a notch in 10mm square material to the following standards:

A.S.T.M. A370, E23 * B.S.131:PART I, II, III, IV . BS EN 10045-1993

DIN 50 115 * IS 1598 1977, IS 1757 1988, IS 1499 1977