Dyna Filters Pvt Ltd

Other Details

DYNA, HEPA Filters offered by us are designed for air intake & in extract systems of critical applications where high filtration is required. These filters are capable of retaining particulate matter down to 0.01 microns. We can make them available with efficiencies between 95% and 99.999% (H10-H14 up to U17).

Features:

    Low initial pressure drop
    High dust holding capacity
    High cost / performance ratio
    Wide range of standard sizes
    Individually leak tested

Minipleat HEPA Filter:

DYNA Minipleat Hepa Filters are used in areas that require high/very high level of purity. These are primarily designed as intake filters for low turbulence displacement flow clean room ceilings & clean workbenches. The typical applications can be found in microelectronics, microbiology, film and magnetic tape production, semiconductor manufacture, medicine, chemistry, pharmacy, compact disk manufacture, laboratories and food industry.

Features:

    Low initial pressure drop
    High dust holding capacity
    High cost / performance ratio
    Wide range of standard sizes
    Individually leak tested
    Factory extruded, lockable type, 69 mm Aluminium casing
    Compact in size and light in weight

Applications:

    Laminar flow for clean benches & other clean room equipments
    Clean room applications

Product Application

These are used for fine particulate filtration in:

    Hospitals (Operation Theater)
    Clean room applications
    Clean room equipments

Type Deep pleated flange or box type:

    Casing Construction Galvanized steel / CRCA powder coated / Aluminium anodized / SS 304
    Separators Corrugated Aluminium
    Filter Media Micro fibre glass paper (Imported)
    Sealant Polyurethane based
    Gasket Neoprene rubber gasket
    BS EN 779 CLASS H10, H11, H12, H13, H14 up to U17
    Filter Efficiency H10 - 95 % @ 0.3 micron
    H11 - 99.9 % @ 0.3 micron
    H12 - 99.97% @ 0.3 micron
    H13 - 99.99% @ 0.3 micron
    H14 - 99.999% @ 0.3 micron
    Eurovent Class EU 10, EU 11, EU 12, EU 13, EU 14 up to U17

Technical Specifications

    Type Minipleat Hepa flange or box type
    Casing Construction Aluminium anodized, extruded type
    Separators Continuous Hot melt glue
    Filter Media Micro fibre glass paper (Imported)
    Sealent Polyurethane based
    Gasket Neoprene rubber gasket
    BS EN 779 Class H13 / H14 up to U17
    Filter Efficiency H13 / H14 up to U17
    Eurovent Class EU 13 / EU 14 up to U17