Dai-Chi Cooling Solutions

Other Details

Dai Chi Fine Filtration Systems offered by us is based on edge filtration technology and effectively utilize stack of paper discs that are tightly compressed on tubular cores so as to form continuous cylindrical surface where contaminants are filtered at edge of Filter Candles. These are offered for different methods of operations including Sludge box, Fouled tank section and clean tank section.

Stages of Operation (Fine Filtration System):

Step 1 :

    Filtering mode in normal operation
    Dirty oil from grinding machine is taken from Dai Chi dirty oil storage area & introduced into filter vessel
    Oil is forced to centre of each element
    All particles larger than one micron are trapped on O.D. of filter element
    Clean oil is deposited into DaiChi's clean oil storage area & delivered to Grinding machine upon demand

Step 2 :

    Draining mode prior to back flushing elements
    Filter vessel is drained into dirty storage area through use of compressed air

Step 3 :

    Back flushing mode is fully automated
    Compressed air is introduced through top & center of each element
    Dirt & debris are forced out of filter vessel into paper lined sludge box that should be emptied approximately once a month
    Entire back flushing procedure takes only six minutes

Advantages :

    Filtration down to 3 um below
    Automatic operation without the use of consumables
    Low maintenance costs
    Extended coolant life
    Increases surface finish of product
    Decreases production cycle time
    Reduce operating costs

Comparative Chart :

    1 Micron = 0.001 mm
    40 microns = White blood cell
    70 microns = Human hair
    100 microns = Table salt