C. Tronix

Other Details

Affirming to

 Astm D 2266 Wear Preventive 60 Minutes @1200 r.p.m.

 Astm D 2783 E.p.  10 seconds or stop at seizure @ 1700 r.p.m.

 Ip 239 E.p.  10 seconds or stop at seizure @ 1500 r.p.m.

 The client needs to pick the test from the P.c. console. The electronic controller immediately sets the test parameter e.g. the engine speed, test time and load.

 The engine speed specified will be immediately regulated the P.c. as fitting for the test.

 The Force will be upheld at a steady on the container holding the balls plunged in oil.

 The test information (Torque or the running time of the machine) will be obtained and interfaced to the Pc programming.

 The programming plots a continuous diagram between the time slipped by and the torque. The closure focus location calculation is according to Astm models; Seizure or 10 seconds passed time for E.p. 60 Minutes slipped by time for Wear Resistance.

 The scar width is measured by a magnifying lens and a Vernier gave the set.