Champion Pharma Machines

Other Details

CPM's Zero Hold-Up / Sparkler Type Filter Press consist of Stainless Steel Shell & Top cover using bolts to give pressure tight enclosure. The filter cartridge assembly inside the shell consists of several horizontally arranged disc type filter plates with perforated supporting screens, filter media & interlocking cups. The entire assembly complete with pump & piping connection is mounted on a suitable S.S. Trolley.

Operation:
 
Zero Hold-Up: The Cartridge assembly consists of plates, perforated screens, spacers and fitter media. Interlocking spacers internally form single pipeline. The unfiltered liquid is centrally fed under pressure from bottom inlet. The liquids spreads out equally on each plate fitted with filter media. Solids remain on filter media and clear. Filtrate flows through precisely made holes on sides of plates and collects in the shell, which then come out through the outlet. In this process, solids are evenly distributed on each plate. The cake is then cleaned from the filter material and used again for filtration process

    Single pass filtration with no solid bypass.
    Full batch recovery, no separate scavenging system needed.
    Proper sealing which allows the filtration of volatile, toxic and inflammable products.
    Plate pack arrangement ensures any type of filtering mediasingularly or  in combination, can be used to achieve required micron efficiency. Easy removal and cleaning of the cartridge  assembly.
    Closed System ensures filtration of toxic, hazardous, explosive materials, efficiently cleaned and sterilized.
    Central feeding ensures no solid inside the vessel, complete recovery of liquids. Cake solids can be dried with N, Complete cake retains over the plate. Uniform filter-aid bed can be formed. Reduces the cost of expensive solvents.


Sparkler Type: The impure liquid to be filtered is fed to the filter shell by pump. It arrives on top of each plate through opening on the sides of plates. As liquid pressure increases, the filter media (Paper/fabric) holds back the impurities & allows the crystal clear filtrate to pass through the central channel (formed by interlocking cups) which takes the filtrate to the outlet of filter. This filter most commonly used to obtain clear liquid. However if required, the cake formed between the plates can be obtained. Filtration is continued until its rate becomes very slow due to increased cake resistance.

Salient Features:

    Available in GMP and Non-GMP model.
    All Contact Parts are made up of S.S. 304, 316, 316L and Non-Contact Parts are made-up of S.S. 304/ M.S. material.
    S.S. / M.S. Jacket can be provided for hot filtration.
    Gives crystal clear filtration by filtering particles up to 1 micron size. Scavenger arrangement to remove all the liquid.
    Cake can be dried either by compressed air or by insert gas, steam.
    Filtration rates from 600 Ltrs/hr. to 30000 Ltrs/hr possible depending on the models.
    Centrifugal / Gear / Lobe pumps can be offered, which can also be used for liquid transfer.
    Sample collecting device & safety valve provided.


Optional:

Flame-Proof motor with Flame-Proof ON-OFF Push Buttons.
 
Capacity Size  Available in 08", 0 14", 0 18", 024", 033" .