Additional Details

ROPP (Roll over pilfer proof) capping machine offered by For Bro Engineers are part of the End to End solution for your container/bottle filling, sealing and labeling requirements.

Pre-filled bottles/containers are continuously fed from to capping machine thorugh conveyor. The bottles are then slowly fed in to the start wheel
ROPP caps from the orientation unit automatically feeds caps in correct direction before entering into delivery chute. Once the Bottle is positioned below the rotating capping head, out of 4 rollers , two rollers will Skirt, Spins and Seals the cap and and other two roller will provinde threading according to  bottle neck diameter. Once the Cap is tightly sealed on the bottle , rotating head will automatically release the bottle and which in turn will come out of the starr wheel and will be assembled on the rotary table OR can be conved to the inspection station Or labbling stating.

Salient Features
- Single motor synchronies conveyor, starwheels and sealing head.
- Variable speed drive n request
- Integrated control panel for ease of operation
- Special guide for small bottles
- No bottle no capping mechansim
- Sealing pressure can be varied to suit different gauges and sizes of ROPP caps.
- Damaged cap quantity be reduced by adjusting the gap between upper and lower plate of orientation unit.

Technical Specifications

- Bottle Diameter - 22 to 60 mm Maximum.
- Bottle Height - 55 mm to 110 mm Maximum.
- ROPP Caps - 22, 25, 28 & 32 mm Diameter.
- Speed - upto 60 Bottles /min
- Power requirement - 1.5 HP for conveyor and 0.25 for Feeder