Blue Chip Cooling Towers

Other Details

Timber Induced Draft Tower (Unique Timber Cross flow Tower) by use of Seagull Bars either in PVC or in Steel, C type Drift Eliminators, Aerodynamic FAR Fans, Drives with or without Gear Boxes, all to give highest thermal efficiency. Use of Seagull Bars ensure film & splash cooling both. This gives more capacity by 20 - 25% over the conventional fill design.

Structure: Selected quality Pine Wood as per IS 2372 Treated with Chromate Copper Arsenate (ASCU Chemicals) as per IS 401.

Water Distribution: Open Gravity type Basin made of Tongue and Grooved Treated Timber Plank/Marine Plywood Fitted with Polypropylene spiral target. nozzles to have uniform hot water distribution over the entire fill area.

Fill: ASCU treated timber splash bars fill supported GRP grids.

Drift Eliminator: Drift Eliminator: Made of treated timber planks supported on grooved treated plywood eliminator frame in herringbone pattern.

Casings & Louvers: Corrugated Asbestos Cement-board/corrugated FRP Sheet On Special Applications.

Hard Wares: Structural Connections are made with Hot Dipped Galvanized Bolts. Nails are of Stainless Steel (304 Quality), Screw Shank Type S. S. 304/316-quality.

Mechanical Equipments:

Fan: Propeller Type Multi-bladed Fan Assembly. Blades are of Cast Aluminum Alloy and Hub of Cast Iron. Fan Directly Coupled with Motor.

Fan Cylinder: Made of HDG Steel/FRP Coated Cylinder Fitted with Hot Dipped Galvanized Steel Fan Guard.

Motor: New India or Equivalent Makes 415 V/3 pH/50 Hz TEFC Weatherproof IP-54 Enclosure. Class-b Insulation Flange Mounted Vertical Motor With Extended Shaft Specially Made For Cooling Tower Applications.