BDS Engineering

Other Details

BLAIRS Pressure booster Pump is an equipment to achieve the right water resource, maintaining the plant constantly under pressure and restricting the electrical pumps' starting time & numbers. The automatic pressure systems are designed to automatically start and stop the pump on opening and closing of taps. Pressure booster Pump is coupled with a Compact designed composed pump, a manometer, a Pressure diaphragm tank (Suitable for drinking liquids - no alcohol), a pressure adjustable switch, and a 3 or 5 ways connection in stamped brass. These pumps should be installed in a covered area, protected against the weather. Features: Simple to use Reliable Economical Low consumption of power Our range is used to: Boost the insufficient water pressure supply from wells and domestic storage tanks to lift water and distribute it in domestic fittings Increase the pressure in aqueducts and automatic water distribution Performance Range: Flow rate up to 50 I/min.(3.0 m3/h) Head up to 60 m Operating Limits: Suction lift up to 8 m Fluid temperature up to 60°C Maximum ambient temperature 40°C Structural Characteristics: Pump body Cast Iron Impeller Brass Motor Support Cast Iron Mechanical seal Carbon/Ceramic Shaft with rotor Stainless Steel Motor: Built-in overload motor protector with automatic reset Permanent split capacitor Insulation Class F Protection IP 44 Technical Specifications: Pump Model POWER Q 0 0.3 0.6 1 1.2 1.5 1.8 2.1 2.4 3.0 m3/h Single phase KW HP l/min 0 5 10 15 20 25 30 35 40 50 PBP 60 0.37 0.5 H (m) 40 38 33.5 29 24 19.5 15 10 5 PBP 80 0.75 1 70 66 61 56 51 46 41 36 31 22