Base Electronics & Systems

Other Details

Item Code: CLT100

• Capacitance Level Transmitter is a compact, low cost, level transmitter with 4-20 mA analogue out-put designed to measure the level of various liquids, and solid in tanks or storage vessels. Measuring range is 0.25 to 3 m for rod probe version. The probe forms an electrical capacitor with the surrounding metal contained wall, or with auxiliary reference probe . With the vessel empty, an initial capacitance exists between the electrode And the metal well or the auxiliary reference probe. When the probe become covered with material to be measured the capacitance will increase and the change will be measured and covered into an analogue (4-20 mA) output signal proportional to the change. Rod or flexible cable can be used for various conductive or non-conductive Liquids.
• Capacitance type microcontroller based Level Indicator Transmitter, series 100 CLT, can be used in a variety of applications for continuous level indication in non fuming conductive liquids with low or medium viscosity like water, water bound solutions. The same unit can also be used for non conductive liquids like mineral oils, turbine oils, cooling oils etc. The model 100 CLT is available as an Integral system, where the electronic insert can either be mounted on the top of the electrode and also as Remote system where electronic insert can be mounted separately near the tank.

Features:

• 2- Wire transmitter.
• Level to volume conversion with strap.
• Wide range electrodes to suit various duties.
• Possibility of calibration and programming in sealed condition of the unit.
• On site calibration. Calibration methods from 2 point calibration to multi-point calibration (up to 10 point.).
• Easy to install.

Product Application

Capacitive Level Tranmitter can be used measure level of in follwing liquids like Acids, Acitone, Amonia Benzine, Feed water, CTC, diesel, oils, fruit ,Juice, milk, wine etc..The probe selection for this tranmitter are as follows,
Conductive material : Water based solutions. Acids, Bases etc, only insulated probe are suggested.
Non- ConductIve matérial : Mostly petrochemical and solvents,Insulated or non-insulated probes can be used.