Banza Electronics system

Other Details

Our range of Uninterrupted Power Supply Systems are designed under the supervision of expert professionals. These UPS supply consistent power and provide total protection to equipment. Our product range is widely appreciated for excellent performance, user friendly interface and longer service life.. These systems are available in various models such as normal and with static switch. Features: Auto restart Auto retransfer Maximum battery service life Uninterrupted manual bypass Low ripple dc output (rectifier) 1% rms silent ups An ISO 9001 company DGS & D rate contract approved Models Available: Normal With static switch Hot standby Parallel redundant (load sharing) Critical / non critical Software (optional): DOS / Windows / Unix/Novell, rs-232 serial Interface, SNMP compatible Standard Specifications: Technology: 20 kHz pulse width modulated and IGBT based Input: Converter 415 volts ± 20% or +20% - 30% 30,4 wire 50hz±7hz Power factor 0. 8 lag to unity High efficiency: >85% Low heat loss: implies lower electricity bills Low input harmonics Protections: high voltage, low voltage, phase reversal, overload CC/CV charger Output: Inverter Voltage: 230 volts 10/4oo/415volts30. Regulation: ±1%on full load for loss or return of ac mains. Frequency: 50 Hz ±0. 002hzcrystal based. Total harmonic distortion: <1% linear load &<_5% nonlinear load wave form: pure sine wave Efficiency:>93% Power factor: 0. 6 lag to unity (0. 5 lag to 0. 5 lead at reduced load) Transient response: for 100% step load change output remains Within 5% of nominal output voltage and recovers within 30 m secs Noise level: < 40 db at 1 mtr.(Totally silent) Crest factor:3:1 Protections: over voltage, over load, under voltage, short Circuit. Over load: 1100mins. 150% 1 minute Cooling: Natural / forced air cooled Note: specifications are subject to change without prior notice Battery: compatible with any type of battery, smf/ tubular/ni-cd etc for suitable backup with required batteries in series or parallel combination. (360 v dc) Protections: over voltage, under voltage, over charging. Metering: normal analog / LCD / led digital display Operating temp: 0°c-45°c Humidity: @ 96% rh (non-condensing) Altitude:1000 mts Static switch : bi-directional [(Optional) synchronous transfer < 5 ms asynchronous transfer < 10 msec] Optional: Customized specificationsOur range of Uninterrupted Power Supply Systems are designed under the supervision of expert professionals. These UPS supply consistent power and provide total protection to equipment. Our product range is widely appreciated for excellent performance, user friendly interface and longer service life.. These systems are available in various models such as normal and with static switch. Features: Auto restart Auto retransfer Maximum battery service life Uninterrupted manual bypass Low ripple dc output (rectifier) 1% rms silent ups An ISO 9001 company DGS & D rate contract approved Models Available: Normal With static switch Hot standby Parallel redundant (load sharing) Critical / non critical Software (optional): DOS / Windows / Unix/Novell, rs-232 serial Interface, SNMP compatible Standard Specifications: Technology: 20 kHz pulse width modulated and IGBT based Input: Converter 415 volts ± 20% or +20% - 30% 30,4 wire 50hz±7hz Power factor 0. 8 lag to unity High efficiency: >85% Low heat loss: implies lower electricity bills Low input harmonics Protections: high voltage, low voltage, phase reversal, overload CC/CV charger Output: Inverter Voltage: 230 volts 10/4oo/415volts30. Regulation: ±1%on full load for loss or return of ac mains. Frequency: 50 Hz ±0. 002hzcrystal based. Total harmonic distortion: <1% linear load &<_5% nonlinear load wave form: pure sine wave Efficiency:>93% Power factor: 0. 6 lag to unity (0. 5 lag to 0. 5 lead at reduced load) Transient response: for 100% step load change output remains Within 5% of nominal output voltage and recovers within 30 m secs Noise level: < 40 db at 1 mtr.(Totally silent) Crest factor:3:1 Protections: over voltage, over load, under voltage, short Circuit. Over load: 1100mins. 150% 1 minute Cooling: Natural / forced air cooled Note: specifications are subject to change without prior notice Battery: compatible with any type of battery, smf/ tubular/ni-cd etc for suitable backup with required batteries in series or parallel combination. (360 v dc) Protections: over voltage, under voltage, over charging. Metering: normal analog / LCD / led digital display Operating temp: 0°c-45°c Humidity: @ 96% rh (non-condensing) Altitude:1000 mts Static switch : bi-directional [(Optional) synchronous transfer < 5 ms asynchronous transfer < 10 msec] Optional: Customized specificationsOur range of Uninterrupted Power Supply Systems are designed under the supervision of expert professionals. These UPS supply consistent power and provide total protection to equipment. Our product range is widely appreciated for excellent performance, user friendly interface and longer service life.. These systems are available in various models such as normal and with static switch. Features: Auto restart Auto retransfer Maximum battery service life Uninterrupted manual bypass Low ripple dc output (rectifier) 1% rms silent ups An ISO 9001 company DGS & D rate contract approved Models Available: Normal With static switch Hot standby Parallel redundant (load sharing) Critical / non critical Software (optional): DOS / Windows / Unix/Novell, rs-232 serial Interface, SNMP compatible Standard Specifications: Technology: 20 kHz pulse width modulated and IGBT based Input: Converter 415 volts ± 20% or +20% - 30% 30,4 wire 50hz±7hz Power factor 0. 8 lag to unity High efficiency: >85% Low heat loss: implies lower electricity bills Low input harmonics Protections: high voltage, low voltage, phase reversal, overload CC/CV charger Output: Inverter Voltage: 230 volts 10/4oo/415volts30. Regulation: ±1%on full load for loss or return of ac mains. Frequency: 50 Hz ±0. 002hzcrystal based. Total harmonic distortion: <1% linear load &<_5% nonlinear load wave form: pure sine wave Efficiency:>93% Power factor: 0. 6 lag to unity (0. 5 lag to 0. 5 lead at reduced load) Transient response: for 100% step load change output remains Within 5% of nominal output voltage and recovers within 30 m secs Noise level: < 40 db at 1 mtr.(Totally silent) Crest factor:3:1 Protections: over voltage, over load, under voltage, short Circuit. Over load: 1100mins. 150% 1 minute Cooling: Natural / forced air cooled Note: specifications are subject to change without prior notice Battery: compatible with any type of battery, smf/ tubular/ni-cd etc for suitable backup with required batteries in series or parallel combination. (360 v dc) Protections: over voltage, under voltage, over charging. Metering: normal analog / LCD / led digital display Operating temp: 0°c-45°c Humidity: @ 96% rh (non-condensing) Altitude:1000 mts Static switch : bi-directional [(Optional) synchronous transfer < 5 ms asynchronous transfer < 10 msec] Optional: Customized specificationsOur range of Uninterrupted Power Supply Systems are designed under the supervision of expert professionals. These UPS supply consistent power and provide total protection to equipment. Our product range is widely appreciated for excellent performance, user friendly interface and longer service life.. These systems are available in various models such as normal and with static switch. Features: Auto restart Auto retransfer Maximum battery service life Uninterrupted manual bypass Low ripple dc output (rectifier) 1% rms silent ups An ISO 9001 company DGS & D rate contract approved Models Available: Normal With static switch Hot standby Parallel redundant (load sharing) Critical / non critical Software (optional): DOS / Windows / Unix/Novell, rs-232 serial Interface, SNMP compatible Standard Specifications: Technology: 20 kHz pulse width modulated and IGBT based Input: Converter 415 volts ± 20% or +20% - 30% 30,4 wire 50hz±7hz Power factor 0. 8 lag to unity High efficiency: >85% Low heat loss: implies lower electricity bills Low input harmonics Protections: high voltage, low voltage, phase reversal, overload CC/CV charger Output: Inverter Voltage: 230 volts 10/4oo/415volts30. Regulation: ±1%on full load for loss or return of ac mains. Frequency: 50 Hz ±0. 002hzcrystal based. Total harmonic distortion: <1% linear load &<_5% nonlinear load wave form: pure sine wave Efficiency:>93% Power factor: 0. 6 lag to unity (0. 5 lag to 0. 5 lead at reduced load) Transient response: for 100% step load change output remains Within 5% of nominal output voltage and recovers within 30 m secs Noise level: < 40 db at 1 mtr.(Totally silent) Crest factor:3:1 Protections: over voltage, over load, under voltage, short Circuit. Over load: 1100mins. 150% 1 minute Cooling: Natural / forced air cooled Note: specifications are subject to change without prior notice Battery: compatible with any type of battery, smf/ tubular/ni-cd etc for suitable backup with required batteries in series or parallel combination. (360 v dc) Protections: over voltage, under voltage, over charging. Metering: normal analog / LCD / led digital display Operating temp: 0°c-45°c Humidity: @ 96% rh (non-condensing) Altitude:1000 mts Static switch : bi-directional [(Optional) synchronous transfer < 5 ms asynchronous transfer < 10 msec] Optional: Customized specificationsOur range of Uninterrupted Power Supply Systems are designed under the supervision of expert professionals. These UPS supply consistent power and provide total protection to equipment. Our product range is widely appreciated for excellent performance, user friendly interface and longer service life.. These systems are available in various models such as normal and with static switch. Features: Auto restart Auto retransfer Maximum battery service life Uninterrupted manual bypass Low ripple dc output (rectifier) 1% rms silent ups An ISO 9001 company DGS & D rate contract approved Models Available: Normal With static switch Hot standby Parallel redundant (load sharing) Critical / non critical Software (optional): DOS / Windows / Unix/Novell, rs-232 serial Interface, SNMP compatible Standard Specifications: Technology: 20 kHz pulse width modulated and IGBT based Input: Converter 415 volts ± 20% or +20% - 30% 30,4 wire 50hz±7hz Power factor 0. 8 lag to unity High efficiency: >85% Low heat loss: implies lower electricity bills Low input harmonics Protections: high voltage, low voltage, phase reversal, overload CC/CV charger Output: Inverter Voltage: 230 volts 10/4oo/415volts30. Regulation: ±1%on full load for loss or return of ac mains. Frequency: 50 Hz ±0. 002hzcrystal based. Total harmonic distortion: <1% linear load &<_5% nonlinear load wave form: pure sine wave Efficiency:>93% Power factor: 0. 6 lag to unity (0. 5 lag to 0. 5 lead at reduced load) Transient response: for 100% step load change output remains Within 5% of nominal output voltage and recovers within 30 m secs Noise level: < 40 db at 1 mtr.(Totally silent) Crest factor:3:1 Protections: over voltage, over load, under voltage, short Circuit. Over load: 1100mins. 150% 1 minute Cooling: Natural / forced air cooled Note: specifications are subject to change without prior notice Battery: compatible with any type of battery, smf/ tubular/ni-cd etc for suitable backup with required batteries in series or parallel combination. (360 v dc) Protections: over voltage, under voltage, over charging. Metering: normal analog / LCD / led digital display Operating temp: 0°c-45°c Humidity: @ 96% rh (non-condensing) Altitude:1000 mts Static switch : bi-directional [(Optional) synchronous transfer < 5 ms asynchronous transfer < 10 msec] Optional: Customized specificationsOur range of Uninterrupted Power Supply Systems are designed under the supervision of expert professionals. These UPS supply consistent power and provide total protection to equipment. Our product range is widely appreciated for excellent performance, user friendly interface and longer service life.. These systems are available in various models such as normal and with static switch. Features: Auto restart Auto retransfer Maximum battery service life Uninterrupted manual bypass Low ripple dc output (rectifier) 1% rms silent ups An ISO 9001 company DGS & D rate contract approved Models Available: Normal With static switch Hot standby Parallel redundant (load sharing) Critical / non critical Software (optional): DOS / Windows / Unix/Novell, rs-232 serial Interface, SNMP compatible Standard Specifications: Technology: 20 kHz pulse width modulated and IGBT based Input: Converter 415 volts ± 20% or +20% - 30% 30,4 wire 50hz±7hz Power factor 0. 8 lag to unity High efficiency: >85% Low heat loss: implies lower electricity bills Low input harmonics Protections: high voltage, low voltage, phase reversal, overload CC/CV charger Output: Inverter Voltage: 230 volts 10/4oo/415volts30. Regulation: ±1%on full load for loss or return of ac mains. Frequency: 50 Hz ±0. 002hzcrystal based. Total harmonic distortion: <1% linear load &<_5% nonlinear load wave form: pure sine wave Efficiency:>93% Power factor: 0. 6 lag to unity (0. 5 lag to 0. 5 lead at reduced load) Transient response: for 100% step load change output remains Within 5% of nominal output voltage and recovers within 30 m secs Noise level: < 40 db at 1 mtr.(Totally silent) Crest factor:3:1 Protections: over voltage, over load, under voltage, short Circuit. Over load: 1100mins. 150% 1 minute Cooling: Natural / forced air cooled Note: specifications are subject to change without prior notice Battery: compatible with any type of battery, smf/ tubular/ni-cd etc for suitable backup with required batteries in series or parallel combination. (360 v dc) Protections: over voltage, under voltage, over charging. Metering: normal analog / LCD / led digital display Operating temp: 0°c-45°c Humidity: @ 96% rh (non-condensing) Altitude:1000 mts Static switch : bi-directional [(Optional) synchronous transfer < 5 ms asynchronous transfer < 10 msec] Optional: Customized specifications