Bakshi The Driller

Other Details

It gives us immense pleasure to offer our clients Directional Drilling Machine GD3500 – L that is sourced from authentic vendors. All the parts of these machines are imported from most renowned merchandisers. The Hydraulic pipes are sourced from American EATON Company. Speed reducer is sourced from Italian Dinamil and German KPM Oil Spa is used for the pushing & pulling and rotating of rotary driving head 14 sets.

Main Equipment

    CUMMINS 239Kw/2200 r/min Two sets
    The Hydraulic Pump: American Sauer Company 90 series, flow adjustable close-circuit piston pump with output 100ml six sets; PARK Gear pump two sets
    The Main Motor: Original imported from American Sauer Company 51 series or Italy Sam H2V, adjustable piston motor with output 108ml using for the pushing and pulling of rotary driving head 12 sets
    The loop flushing valve produced by American Sauer Company centralized with motor, which makes it less room and fewer pipelines
    Two sets of 400 KW transmission boxes are imported from Germany, Two sets
    The Hydraulic pipes are from American EATON Company
    Original high pressure steel rings and rubber pipes are imported from Italy
    High wear- resisting, high anti-attack alloy steel rack and pinion
    Controlled by PLC system, make circuit simple and reliable
    It is equipped with 3T crane on the rig

Main Performance Characteristics:

    The rotating and pushing & pulling of rotary driving head adopt the close circuit. Other assistant mechanism adopts open-circuit
    It adopts the wide-steel caterpillars, which is convenient to up to and down, no need to unload. It can move and position directly
    The rack and pinion is adopted by the pushing & pulling transmission of rotary driving head.
    The main axle is movable
    The movable beam is convenient to carry up and down and transport as well as adjust entry angle
    The front and back clippers could be apart and the clamp moves within the whole distance. The vice jaw grip could be changed according the drilling rods
    It is controlled by wire
    The pushing & pulling speed and rotating of rotary driving head could be adjusted within the limitation
    It is equipped with mud pressure release mechanism
    It is equipped separately with heating and cooling systems for hydraulic oil
    The separated operating room is big with two seats, which is comfortable with good vision. It is equipped with air condition
    The anchor board is used for position, and the anchor box could be optional
    Both sides of the main machine are equipped anti-slippery pathway and protecting rods
    Motor can be show in digital, easy to control
    The station of mud pump and mud mixed system is outside, be optional
    It is equipped with support of the middle drill rod
    Two sets of five pulling & pushing motors are equipped with manual clutch, which is suitable for different construction