Avani Engineers

Other Details

Providing and fixing 30mm thick "rajshri" brand factory made solid panel pvc door shutter (conforming to criteria of testing as per is : 4020 with upto date amendments) consisting of frame made out of m. S. Tubes of 19 gauge thickness and size of 19mm x 19mm for stiles, & 15mm x 15mm for top & bottom rails. M. S. Frame shall have a coat of steel primers of approved make and manufacture. M. S. Frame shall be covered with 5mm thick heat moulded "rajshri" pvc ' c channel of size 30 x 50mm forming stiles, and 5mm thick, 75mm wide pvc sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross pvc sheet as gap insert for top rail & bottom rail. Panelling of 5mm thick pvc sheet to be fitted in the m. S. Frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick pvc sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick pvc strip of 20mm width is to be stuck on the interior side of the ' c channel using pvc solvent adhesive, complete as per direction of engineer-in-charge, manufacturer's specification & drawing.