Avani Engineers

Other Details

Providing and fixing "Rajshri" brand factory made 32mm thick Moulded door shutter consisting of solid core single leaf Flush Door of 30mm thickness, lipped with 15mm (5mrnx3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 1mm thick termite proof, watei proof and fire resistant moulded PVC sheet with 2, 4, 6 raised panel design in different plain and or prelam colours on one_ side after routing the moulded design on flush door & 1mm plain and or prelam PVC sheet on other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc. complete as per direction of Engineer-in-charge ~ manufacturer's specification and drawing. Specification: Providing and fixing 30mm thick "Rajshri" brand factory made Moulded door shutter - wood free consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have sr coat of steel primers. The inner panel shall consist of 25mm thick High Density EPS conforming to IS 4671-1984 bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet baton (made by sticking 2nos. PV(%^ sheets of 5mm thickness using PVC solvent cement) and stile sides 25mm (5mm x 5) thick and 30mm width PVC Sheet fitted along M.S. tube for lock provision & for lock height 5mm thick PVC sheet of size 150mm x 100mm fixed with uppe%^ & lower face of inner side of EPS Panel etc. complete as per direction of Engineer-in-charge, manufacturer's specification and drawing.