Askib Engineers Private Limited

Other Details

Linear Gage LGK SERIES 542 — Slim type FEATURES • Compact design with a 12mm outside diameter. • Excellent protection against dust and splashing water (IP66) in harsh shop-floor environments. • Maximum permissible acceleration values for shock and impact, 100G(11ms) (IEC68-2-27) • Output differential square wave signals for a wide range of applications. • Employs linear stroke ball bearings on the spindle movement for durability. • Thrust Stem with a clamp nut is optional. • Interchangeable contact points for dial indicators can be used. Technical Data Accuracy: Refer to the list of specifications (excludes quantizing error) Resolution: 1μm, 0.5μm or 0.1μm Scale type: Photoelectric linear encoder Max. response speed: 1500mm/s, 400mm/s (542-158) Contact point: ø3mm carbide Stem: ø8mm Bearing type: Linear ball bearing Measuring force: Refer to the list of specifications Output signal: 90° phase difference, differential square wave (RS-422A equivalent) Signal pitch: 0.4μm (542-158), 2μm (542-157), 4μm (542-156) Dust/Water protection level: IP66Range Order No. Resolution Accuracy* Measuring force** Stem dia. Remarks 10mm (.4”) 542-156 0.001mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Gold banded 10mm (.4”) 542-157 0.0005mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Blue banded 10mm (.4”) 542-158 0.0001mm (0.8+L/50)μm 0.8N / 0.75N / 0.7N 8mm Green banded *L = Measured length (mm) **Orientation of gage: Spindle DOWN / Horizontal / Spindle UPLinear Gage LGK SERIES 542 — Slim type FEATURES • Compact design with a 12mm outside diameter. • Excellent protection against dust and splashing water (IP66) in harsh shop-floor environments. • Maximum permissible acceleration values for shock and impact, 100G(11ms) (IEC68-2-27) • Output differential square wave signals for a wide range of applications. • Employs linear stroke ball bearings on the spindle movement for durability. • Thrust Stem with a clamp nut is optional. • Interchangeable contact points for dial indicators can be used. Technical Data Accuracy: Refer to the list of specifications (excludes quantizing error) Resolution: 1μm, 0.5μm or 0.1μm Scale type: Photoelectric linear encoder Max. response speed: 1500mm/s, 400mm/s (542-158) Contact point: ø3mm carbide Stem: ø8mm Bearing type: Linear ball bearing Measuring force: Refer to the list of specifications Output signal: 90° phase difference, differential square wave (RS-422A equivalent) Signal pitch: 0.4μm (542-158), 2μm (542-157), 4μm (542-156) Dust/Water protection level: IP66Range Order No. Resolution Accuracy* Measuring force** Stem dia. Remarks 10mm (.4”) 542-156 0.001mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Gold banded 10mm (.4”) 542-157 0.0005mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Blue banded 10mm (.4”) 542-158 0.0001mm (0.8+L/50)μm 0.8N / 0.75N / 0.7N 8mm Green banded *L = Measured length (mm) **Orientation of gage: Spindle DOWN / Horizontal / Spindle UPLinear Gage LGK SERIES 542 — Slim type FEATURES • Compact design with a 12mm outside diameter. • Excellent protection against dust and splashing water (IP66) in harsh shop-floor environments. • Maximum permissible acceleration values for shock and impact, 100G(11ms) (IEC68-2-27) • Output differential square wave signals for a wide range of applications. • Employs linear stroke ball bearings on the spindle movement for durability. • Thrust Stem with a clamp nut is optional. • Interchangeable contact points for dial indicators can be used. Technical Data Accuracy: Refer to the list of specifications (excludes quantizing error) Resolution: 1μm, 0.5μm or 0.1μm Scale type: Photoelectric linear encoder Max. response speed: 1500mm/s, 400mm/s (542-158) Contact point: ø3mm carbide Stem: ø8mm Bearing type: Linear ball bearing Measuring force: Refer to the list of specifications Output signal: 90° phase difference, differential square wave (RS-422A equivalent) Signal pitch: 0.4μm (542-158), 2μm (542-157), 4μm (542-156) Dust/Water protection level: IP66Range Order No. Resolution Accuracy* Measuring force** Stem dia. Remarks 10mm (.4”) 542-156 0.001mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Gold banded 10mm (.4”) 542-157 0.0005mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Blue banded 10mm (.4”) 542-158 0.0001mm (0.8+L/50)μm 0.8N / 0.75N / 0.7N 8mm Green banded *L = Measured length (mm) **Orientation of gage: Spindle DOWN / Horizontal / Spindle UPLinear Gage LGK SERIES 542 — Slim type FEATURES • Compact design with a 12mm outside diameter. • Excellent protection against dust and splashing water (IP66) in harsh shop-floor environments. • Maximum permissible acceleration values for shock and impact, 100G(11ms) (IEC68-2-27) • Output differential square wave signals for a wide range of applications. • Employs linear stroke ball bearings on the spindle movement for durability. • Thrust Stem with a clamp nut is optional. • Interchangeable contact points for dial indicators can be used. Technical Data Accuracy: Refer to the list of specifications (excludes quantizing error) Resolution: 1μm, 0.5μm or 0.1μm Scale type: Photoelectric linear encoder Max. response speed: 1500mm/s, 400mm/s (542-158) Contact point: ø3mm carbide Stem: ø8mm Bearing type: Linear ball bearing Measuring force: Refer to the list of specifications Output signal: 90° phase difference, differential square wave (RS-422A equivalent) Signal pitch: 0.4μm (542-158), 2μm (542-157), 4μm (542-156) Dust/Water protection level: IP66Range Order No. Resolution Accuracy* Measuring force** Stem dia. Remarks 10mm (.4”) 542-156 0.001mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Gold banded 10mm (.4”) 542-157 0.0005mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Blue banded 10mm (.4”) 542-158 0.0001mm (0.8+L/50)μm 0.8N / 0.75N / 0.7N 8mm Green banded *L = Measured length (mm) **Orientation of gage: Spindle DOWN / Horizontal / Spindle UPLinear Gage LGK SERIES 542 — Slim type FEATURES • Compact design with a 12mm outside diameter. • Excellent protection against dust and splashing water (IP66) in harsh shop-floor environments. • Maximum permissible acceleration values for shock and impact, 100G(11ms) (IEC68-2-27) • Output differential square wave signals for a wide range of applications. • Employs linear stroke ball bearings on the spindle movement for durability. • Thrust Stem with a clamp nut is optional. • Interchangeable contact points for dial indicators can be used. Technical Data Accuracy: Refer to the list of specifications (excludes quantizing error) Resolution: 1μm, 0.5μm or 0.1μm Scale type: Photoelectric linear encoder Max. response speed: 1500mm/s, 400mm/s (542-158) Contact point: ø3mm carbide Stem: ø8mm Bearing type: Linear ball bearing Measuring force: Refer to the list of specifications Output signal: 90° phase difference, differential square wave (RS-422A equivalent) Signal pitch: 0.4μm (542-158), 2μm (542-157), 4μm (542-156) Dust/Water protection level: IP66Range Order No. Resolution Accuracy* Measuring force** Stem dia. Remarks 10mm (.4”) 542-156 0.001mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Gold banded 10mm (.4”) 542-157 0.0005mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Blue banded 10mm (.4”) 542-158 0.0001mm (0.8+L/50)μm 0.8N / 0.75N / 0.7N 8mm Green banded *L = Measured length (mm) **Orientation of gage: Spindle DOWN / Horizontal / Spindle UPLinear Gage LGK SERIES 542 — Slim type FEATURES • Compact design with a 12mm outside diameter. • Excellent protection against dust and splashing water (IP66) in harsh shop-floor environments. • Maximum permissible acceleration values for shock and impact, 100G(11ms) (IEC68-2-27) • Output differential square wave signals for a wide range of applications. • Employs linear stroke ball bearings on the spindle movement for durability. • Thrust Stem with a clamp nut is optional. • Interchangeable contact points for dial indicators can be used. Technical Data Accuracy: Refer to the list of specifications (excludes quantizing error) Resolution: 1μm, 0.5μm or 0.1μm Scale type: Photoelectric linear encoder Max. response speed: 1500mm/s, 400mm/s (542-158) Contact point: ø3mm carbide Stem: ø8mm Bearing type: Linear ball bearing Measuring force: Refer to the list of specifications Output signal: 90° phase difference, differential square wave (RS-422A equivalent) Signal pitch: 0.4μm (542-158), 2μm (542-157), 4μm (542-156) Dust/Water protection level: IP66Range Order No. Resolution Accuracy* Measuring force** Stem dia. Remarks 10mm (.4”) 542-156 0.001mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Gold banded 10mm (.4”) 542-157 0.0005mm (1.5+L/50)μm 0.8N / 0.75N / 0.7N 8mm Blue banded 10mm (.4”) 542-158 0.0001mm (0.8+L/50)μm 0.8N / 0.75N / 0.7N 8mm Green banded *L = Measured length (mm) **Orientation of gage: Spindle DOWN / Horizontal / Spindle UP