Apurva Enterprises

Other Details

37' Flare Tube Fittings are one of the most compact form of fittings which have superior pressure and viation handng capacity and are manufactured in accordance to SAE J514. This seang is made by the contact between two metal surfaces, with no deformation of the single components. The coupng between the of the fittings and the flared tubes can be guaranteed by the tightening nuts and by the pressure sleeves on inside. This allows to reazed a fast assembng-disassembng tubes making the easiest reazation of complex hydrauc systems. These fittings can be manufactured in a single series defined "UNIVERSAL" since the and the nut of the fitting remains same even when switching from a inches sized tube to a metric tubes, and since there are no doubles of diameters with different working pressures. Under the mechanical strength given by the tightening of the nuts on the fitting , the flared 37° part of the tube couples with the conical 37° part of the fitting giving birth to a metal to metal seal. The pressure sleeve hosted in the inside part of the nut assures the correct agnment of the system diminishing the viations and avoiding any possible trouble or damaging of the tube during the assembly phase. The fluid components industry, for many years now, have been emphasizing on the three main factors, viz., safety, easy assembly and leakage-free tightness and the 37° flared fitting an effective response to all the above-mentioned problems. These flare fittings have been tested and tried all over the globe for their reabity, easy-assembly, repeated assembly-disassembly feature, superior pressure and viation handng capacities and acceptance by major fluid components industry. Sizes : 1/8" to 1-1/2" Tube OD and 3mm to 38mm OD Tube. Material of Construction: Steel, SS-304, SS-316, ass, etc., Material conforming to NACE MR 01-75 is available on specific requests.