Achala Engineering And Electronics

Other Details

The SM 108 model stand base mounting chlorinator has been designed with a flow meter, gas flow control valve, a vacuum controller chamber, chlorine / water, pressure gauze, a gas filter, a injector to connect motive water, and point of application in order to ensure continuous & constant flow of chlorine / sulfur dioxide or ammonia gas in fully vacuum mode. 

The SM108 model operates under the following principle:

In sm-108 model the chlorinator is operated under vacuum.

The vacuum created in the injector by water pressure passes through pvc piping/tubing to the vacuum regulator chamber via control valve

It enters a gas filter assembly where moisture and foreign particles are removed and send to differential vacuum regulator

Here, the diaphragm assembly dislocates inlet valve with the help of vacuum on one side, atmosphere pressure on the other and allows the gas to flow through flow meter via control valve where the flow rate of gas can be adjusted manually

The gas passes to the injector where it is mixed with water in the mixing chamber and the solution is discharged to the points of application

If the water supply to the injector fails or there is any block in the vacuum, the inlet valve inside the vacuum regulator assembly immediately isolates the gas under pressure and stops the flow of gas even though the cylinder valve is open and the gas inside the system is exhausted through the vent via relief valve

Areas of application 

Water filtration plants

Sewage treatment plants

Cooling water systems

Industrial effluent treatment.