Abacus Electronics Private Limited

Other Details

Introduction: ACON-08 (Fiber Optic to RS232/RS485 Converter) converter converts .Asynchronous serial to Fiber Optics. Specifications: Communication: Transmission ne: Dual Multimode Optical Cable Interfaces: Asynchronous Rs232 //rs422/rs485 (2 Wire/4 Wire) Auto Control Serial Side Connectors: Db-9 Female For Rs232 pbt For Rs485 And Rs422 Optical Side Connector: St-female Speed In Bps: 4800 To 115200 Optic Wavelength: 820 Nm Fiber Range: 2.5 Miles Optical Fiber Sizes: 50/125um,62.5/125um,100/140um & 200 Micro MeteR Indications: When Unit ACON-08 is powered on LED glows continuously. Mechanical: Input Side Connector : Dual Multimode optical cable Output Side Connector : DB 9 pin –Female Power Connector : ‘L’ type 3 pin PBT Connector Enclosure : Din Rail Mounting. Dimensions : 45[W] X 110[D] X 75[L]mm. Electrical: Power Supply : 90-230VAC, +10%, 50 Hz. Power Consumption : 1.2 Watt Optical Isolation : 1.5 KV. Operating Conditions: Temperature : 0-55 0 C. Relative Humidity : 5- 95 %- non condensing. Dip Setting: Remove the plate at the bottom of the converter. Do the necessary settings as per the requirement. Note: Connect the Mains to proper points i.e. For 230VAC supply, connections should be made between points 0 and 230.